Last Updated: November 11, 2026
A prefabricated home is built in a factory while your site is prepared, then delivered and installed, so the two biggest stages run at the same time instead of one after the other. POMO’s published prices are $27,750 inc GST for a 20 m² compact studio, $36,120 inc GST for the 40 m² granny flat model and $62,150 inc GST for a 60 m² relocatable home, all at lockup stage; site works, connections, approvals and transport are quoted for your block, so the total depends on your site and the finishes you choose.
To compare factory-built options with ready-made kit layouts, browse kit home designs on Kit Home Floor Plans.
How long does a prefabricated home take?
The timeline splits into three distinct phases.
First, council or certifier approval, whose timing is set by your local authority and the approval pathway. Second, the factory build, done under cover so weather does not stop work; ask for the current factory schedule when you order. Third, delivery and installation once the slab or subfloor is ready and services are roughed in; timing depends on home size and site access. What surprises most owner-builders is how much work happens in parallel. While your home is being built in the factory, you can be preparing the site, running power and water connections, and finalising landscaping plans. This overlap is where the real time savings live.
Factory construction phase
The factory build isn’t a compromise on quality.
Every wall frame is jig-built to millimetre precision, plumbing is tested before the plaster goes on, and electrical systems are pre-wired to the required standards with full compliance certificates issued before the home leaves the factory. Quality control inspections happen at multiple stages: frame completion, rough-in, lining, fit-out, and final pre-delivery.
Site Requirements and Preparation
Your site needs a level building pad, a concrete slab or steel subfloor system, and services (power, water, sewer) brought to the connection points.
If you’re on rural land, permits may not be as complex as you think, but you still need to check local regulations. The slab must cure for the period your engineer specifies before delivery. Access for the delivery truck and crane is critical – you need an access path and overhead clearance that meet the requirements for the delivery equipment.
Council approvals and compliance
Prefabricated homes must meet the same National Construction Code (NCC) requirements as site-built houses.
The difference is that the factory handles compliance for the building shell, providing engineering certificates, energy efficiency reports, and structural warranties. Your responsibility as an owner-builder is securing the development approval (DA) or complying development certificate (CDC), which covers setbacks, height limits, and land use. Many suppliers provide documentation packages specifically designed to simplify council submissions.
What’s included and what’s extra
POMO’s published prices are $27,750 inc GST for a 20 m² compact studio, $36,120 inc GST for the 40 m² granny flat model and $62,150 inc GST for a 60 m² relocatable home, all at lockup stage. Lockup means the steel-framed building is enclosed. Internal fit-out, site costs (slab or footings, services connection, earthworks), council and certifier fees, transport and crane, air conditioning, landscaping and fencing are priced separately, so compare quotes on the same inclusions list. Understanding the difference between modular homes and kit homes matters here – kit homes look cheaper on paper but require you to manage trades and materials separately, and how well those trades are managed has a big effect on the final cost.
Hidden costs owner-builders miss
Three costs catch first-time owner-builders off guard.
First, service connections: running power from the street to your home is priced on distance, and sewer or septic installation on your site conditions, so get both quoted early. Second, crane hire for difficult access sites: if the truck can’t get close to the slab, you’ll need a larger crane at extra cost. Third, bushfire attack level (BAL) upgrades: if your land is in a bushfire-prone area, expect additional material and glazing costs that depend on the BAL rating.
They’re particularly strong for rural properties where getting tradies to site is expensive, for granny flats where demountable options offer flexibility, and for narrow or difficult blocks where standard construction would require expensive engineering. If you’re planning a highly custom architectural design with complex rooflines and non-standard angles, traditional construction may serve you better.

Related Questions
Are prefabricated homes as durable as site-built homes?
Yes – steel-framed prefabricated homes meet the same NCC structural requirements and often exceed them. The controlled factory environment means framing stays dry during construction, eliminating the risk of frame shrinkage and plaster cracking that occurs when timber frames get wet on site. Steel frames also resist termites and rot, making them particularly suitable for coastal and tropical Australian conditions. Most manufacturers provide a steel warranty on the steel frame.
Can I customise a prefabricated home design?
Most suppliers offer significant customisation within their standard range. You can typically modify internal layouts (moving non-structural walls), upgrade finishes (stone benchtops, hybrid flooring, higher-spec tapware), and choose external cladding colours and materials. What you can’t easily change is the structural module dimensions – these are set by transport regulations (maximum dimensions for road transport without escort). For owner-builders wanting a custom floorplan, modular homes offer more flexibility than many assume.
How do I finance a prefabricated home as an owner-builder?
Financing works differently for prefabricated homes. Most lenders treat them as construction loans, releasing funds in stages: deposit, slab completion, factory build completion, and final installation. Some specialist lenders now offer progress payment schedules aligned with the prefab timeline, which is faster than traditional construction. Owner-builder loans typically require a fixed-price building contract and may apply a lower maximum loan-to-value ratio than a standard home loan.
Get Specific Advice
Every site is different, and the right advice comes from someone who has seen your block and understands your local council’s requirements.
For specific pricing, site assessments, or to discuss floorplan options that suit your land, call 1300 866 131 or email info@portablemodular.com.au. Our complete guide covers the full owner-builder process including council negotiations, site preparation checklists, and handover inspections.